Skocz do zawartości
Samsung Galaxy A7 (2018) - przecieki na temat parametrów | Samsung Galaxy A5 (2018) - przecieki na temat parametrów | Samsung Galaxy A5 (2018) i Galaxy A7 (2018)na renderach | Samsung Galaxy A5 2018 i Galaxy A7 2018 z wyświetlaczem Infinity Display | Etui ZeroLemon dla Samsunga Galaxy Note 8 | Samsung Gear Fit 2 otrzymał aktualizację. | Aplikacja Go Keyboard ma zaszytego w sobie wirusa!! | Recenzja Galaxy Note 8 wg. Spider'sWeb TV | Uwaga na Galaxy Note 8 BEZ Dual SIM | Samsung Galaxy Tab Active 2 zdradza swoją specyfikację | Samsung Galaxy J5 (2016) oraz tablety Galaxy Tab A z Nougat ?? | Atak BlueBorne: zagrożonych 6 miliardów urządzeń z bluetoothem | Pierwsze problemy z Android 8.0 Oreo | Zadebiutował Samsung Galaxy J7+ | Samsung Galaxy S9 - oficjalna zapowiedź już w styczniu? | Samsung Galaxy A5 2017 otrzymuje aktualizację do Androida 7.0 Nougat | [IFA] Samsung – podsumowanie pierwszego dnia targów | Antyweb.pl / mBank ostrzega przed nowym wirusem na Androidzie | Flashowanie Odinem w Win10 | Elastyczne wyświetlacze od Samsunga | Wymiary Samsunga Galaxy S6 | Samsung Galaxy S6 Edge | Samsung Galaxy S6 szczegóły kamery | Lizak dla Note 4 w Polsce | Galaxy S6 i Galaxy Edge w przeciekach zdjęć | Patent Samsunga na nowy wyświetlacz krawędziowy | Samsung usuwa śmieci z pamięci | Samsung Galaxy S4 dostaje oficjalny Lollipop | Samsung Galaxy Note Edge | Specyfikacja Samsunga S6 | Koniec ze "śmieciami" od operatorów | Google Nexus 6 | FBI kontra Lollipop | Note 4 Gold | Chudy smartfon | Komunikacja miejska w Google Maps | Szpiegujące aplikacje | S6 bliżej niż myslisz | Galaxy Note 4 z wadami | Android 5.0 Lollipop oficjalnie | Android L będzie szyfrował dane | Nadchodzi Android L | Galaxy A7 - Najnowszy, największy ale limitowany | Galaxy A3 i A5 pokazują się w filmie | Nowy Galaxy Note 4 | Samsung rzuca wyzwanie Ice Bucket Challenge | Samsung Galaxy Mega 2 w przedsprzedaży | Aparat w Samsungu Galaxy Note 4 | Nowa wersja Galaxy S5 | Ultrasonic Cover dla Samsunga Galaxy Note 4 |
  • Ogłoszenia

    • Dychowski

      Forum w przebudowie - rekonstrukcja   28.08.2017

      Witam Forumowiczów, Z racji faktu, iż dawno tu nic się nie działo, postanowiłem wskrzesić to forum i zaktualizować do najnowszej wersji IPB, poprawić wszystkie błędy techniczne, poprawić grafikę, design i po tych technicznych akcjach, przejść do przebudowy całego forum tak ażeby było aktualne i na bieżąco. Z tejże racji pokażą się nowi moderatorzy, nowa załoga a jeśli wśród Was są fani tej marki i chcieliby dołączyć do nowej załogi forum, zapraszam na PW. Forum powinno być gotowe do końca września gdyż jest to masa pracy, dodawanie wszystkich modeli których nie było etc. Uzbrojcie się cierpliwość a za chwilkę będziecie mogli z nowego forum lepiej i wygodniej korzystać.   Pozdrawiam, Dychowski
Radek

[KERNEL][I9300] SiyahKernel s3 -v1.9.1

Rekomendowane odpowiedzi

Jak w temacie :SiyahKernel-S3-v1.0 na SGS 3

 

Features:

 

 

  • CPU over/underclock: 100-1800MHz 18-steps
  • CPU underclock (600mV-1500mV). vdd_levels and UV_mV interfaces.
  • GPU undervolting/overclocking (40MHz-800MHz)
  • Insecure adb even though we have ro.secure=1
  • optional smooth_scaling for those who wants to limit fast scaling of governors (such as ondemand)
  • triangle-away app support
  • added hotplug governor and modified it to support quad-core
  • Auto-root. You can also remove root via ExTweaks app and install it without rebooting your phone again. Auto-root can be disabled as well.
  • You can completely disable android logger using ExTweaks app
  • Adjustable charging speeds for AC and USB
  • Cpu governor optimizations
  • Gpu voltage, clock and stepcount interfaces in ExTweaks
  • governor-aware stand-hotplug for old conventional governors
  • Available CPU Governors: Pegasusq (default), Hotplug, Ondemand, Lulzactive, Conservative, Performance, Userspace, Powersave
  • CIFS as module
  • Available I/O schedulers: CFQ (default), noop, Deadline, SIO, V®
  • init.d support
  • ARM topology support (SCHED_MC)
  • default idle mode is IDLE+LPA (highly recommended). however you can change the default to AFTR+LPA using ExTweaks.
  • Automatic EFS Backup
  • Samsung proprietary ExFat modules are loaded
  • Lots of I/O tweaks and filesystem optimizations via some parts of thunderbolt scripts.
  • NTFS automounting for USB sticks. When you plug in an NTFS formatted USB flash it will be automatically mounted to /mnt/ntfs folder.
  • Almost everything is configurable such as scheduler features, hotplug thresholds, GPU frequencies, voltages, arm topology modes... and they are configurable via simple and free
  • mDNIe negative effect toggle with home button (press it four times). the purpose of this feature is to inverse the colors especially when the background is white or bright. making the background darker will make your battery last longer.
  • and some more not worth mentioning as separate items such as disabling mali state tracking and disabling some unnecessary debugging etc...

 

 

Zamieszczam dwie wersje (w załączniku) ,instalka pod CWM i pod Odina

Siyah-s3-v1.0-CWM.zip

Siyah-s3-v1.0.tar

Edytowane przez Punisher (wyświetl historię edycji)

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel-S3-v1.1

 

Changelog :

 

removed GPU settings from ExTweaks temporarily

removed all non-hotplugaware governors and disabled stand-hotplug

Fixed camera & gfx problems

back to old toolchain (prebuilt 4.4.3) which is safe and at least as performant

some other tiny changes to make logcat output less chatty.

fixed NTFS mounting

fixed charge-current error messages in ExTweaks

 

 

 

Siyah-s3-v1.1.tar

Siyah-s3-v1.1-CWM.zip

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel-S3-v1.2.6

 

Changelog:

Cm9 & AOSP support with the same kernel image.

Headphone amplification in ExTweaks. Amplification level selection for both left and right channels and dac-direct settings (thanks to Supercurio for his project-voodoo implementation)

some pegasusq tweaks

removed locking to 1200MHz when the highest GPU step is used (means less heat when playing games)

Linux 3.0.35

fixed lagging and haptic feedback (1.2 -> 1.2.1)

fixed touchkey lights not turning off (1.2.1 -> 1.2.2)

fixed cpu stuck at 1200MHz for CM9 (1.2.2 -> 1.2.3)

fixed autoloading of exfat modules for cm9 (1.2.3 -> 1.2.4). you can use vold-exfat.zip (CWM flashable vold from samsung roms) to use exfat on cm9 (use at your own risk)

fixed ram usage reporting of running apps because of a missing part while merging with 3.0.35 (1.2.4 -> 1.2.5)

fixed i/o scheduler setting in ExTweaks not being applied after restart (1.2.5 -> 1.2.6)

Siyah-s3-v1.2.6.tar

Siyah-s3-v1.2.6-CWM.zip

Edytowane przez Radek (wyświetl historię edycji)

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel-S3-v1.3.2

 

Changelog:

 

applied AndreiLux’s mali platform rewrite (thanks to AndreiLux for removing most of the garbage code)

ported original Voodoo Sound implementation from project-voodoo

added headset amplification level, stereo expansion gain, bass boost, hi-fi play, dac direct, anti-jitter and mono downmix settings to ExTweaks

added insecure/secure adbd setting in ExTweaks. default is secure.

added GPU voltage, threshold & stepcount settings in ExTweaks.

modified gpu thresholds a little

fixed notification lights not being active for some time after a restart

removed mali resume frequency and voltage settings which sets the clock to 266MHz after idle

Android logger as module

added sqlite3 binary to ramfs to be used in some optimization scripts (such as the one which will disable fastdormancy)

Enabled some commented kernel tweaks and added some CFS tweaks.

rounded cpu voltages to 25mV to have better support with existing undervolting applications.

added cfs-tweaks selection to ExTweaks that modifies granularity and latency settings. Available presets are “Samsung default”, “Linux kernel default” and “Thunderbolt script default”

added max_cpu_lock setting to ExTweaks which lets you choose the number of cores to be used in hotplugging. default is unlocked and quad-core and the other settings are triple-core, dual-core and single-core.

cherry-picked some UV_mV changes from AndreiLux’s repository which will round the voltage settings to the nearest 12.5mV step.

Linux 3.0.36

(v1.3 -> v1.3.1) fixed speaker volume reduction problem

(v1.3.1 -> v1.3.2) fixed headphone detection. fixed speaker volume reduction (again.. now it should be the same as stock level).. reverted cpu voltage roundings.

Siyah-s3-v1.3.2.tar

Siyah-s3-v1.3.2-CWM.zip

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel-S3-v1.3.4beta

 

Changelog:

applied AndreiLux’s mali platform rewrite (thanks to AndreiLux for removing most of the garbage code)

ported old wm8994 based sound enhancements to our wm1811 implementation from project-voodoo

added headset amplification level, stereo expansion gain, bass boost, hi-fi play, dac direct, anti-jitter and mono downmix settings to ExTweaks

added insecure/secure adbd setting in ExTweaks. default is secure.

added GPU voltage, threshold & stepcount settings in ExTweaks.

modified gpu thresholds a little

fixed notification lights not being active for some time after a restart

removed mali resume frequency and voltage settings which sets the clock to 266MHz after idle

Android logger as module

added sqlite3 binary to ramfs to be used in some optimization scripts (such as the one which will disable fastdormancy)

Enabled some commented kernel tweaks and added some CFS tweaks.

rounded cpu voltages to 25mV to have better support with existing undervolting applications.

added cfs-tweaks selection to ExTweaks that modifies granularity and latency settings. Available presets are “Samsung default”, “Linux kernel default” and “Thunderbolt script default”

added max_cpu_lock setting to ExTweaks which lets you choose the number of cores to be used in hotplugging. default is unlocked and quad-core and the other settings are triple-core, dual-core and single-core.

cherry-picked some UV_mV changes from AndreiLux’s repository which will round the voltage settings to the nearest 12.5mV step.

Linux 3.0.36

(v1.3 -> v1.3.1) fixed speaker volume reduction problem

(v1.3.1 -> v1.3.2) fixed headphone detection. fixed speaker volume reduction (again.. now it should be the same as stock level).. reverted cpu voltage roundings.

(v1.3.2 -> v1.3.3) changed headphone detection again (should fix some random reboots, hopefully) and disabled thunderbolt scripts for now.

(v1.3.3 -> v1.3.4) changed descriptions and removed some items from audio tab in ExTweaks. decreased default headphone volume slightly.added/removed some options and some defaults are changed. some cleanup in init scripts. reverted some parameters in pegasusq governor to defaults.

Siyah-s3-v1.3.4beta.tar

Siyah-s3-v1.3.4beta-CWM.zip

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel-S3-v1.3.7beta

 

Changelog:

applied AndreiLux’s mali platform rewrite (thanks to AndreiLux for removing most of the garbage code)

ported old wm8994 based sound enhancements to our wm1811 implementation from project-voodoo

added headset amplification level, stereo expansion gain, bass boost, hi-fi play, dac direct, anti-jitter and mono downmix settings to ExTweaks

added insecure/secure adbd setting in ExTweaks. default is secure.

added GPU voltage, threshold & stepcount settings in ExTweaks.

modified gpu thresholds a little

fixed notification lights not being active for some time after a restart

removed mali resume frequency and voltage settings which sets the clock to 266MHz after idle

Android logger as module

added sqlite3 binary to ramfs to be used in some optimization scripts (such as the one which will disable fastdormancy)

Enabled some commented kernel tweaks and added some CFS tweaks.

rounded cpu voltages to 25mV to have better support with existing undervolting applications.

added cfs-tweaks selection to ExTweaks that modifies granularity and latency settings. Available presets are “Samsung default”, “Linux kernel default” and “Thunderbolt script default”

added max_cpu_lock setting to ExTweaks which lets you choose the number of cores to be used in hotplugging. default is unlocked and quad-core and the other settings are triple-core, dual-core and single-core.

cherry-picked some UV_mV changes from AndreiLux’s repository which will round the voltage settings to the nearest 12.5mV step.

Linux 3.0.36

(v1.3 -> v1.3.1) fixed speaker volume reduction problem

(v1.3.1 -> v1.3.2) fixed headphone detection. fixed speaker volume reduction (again.. now it should be the same as stock level).. reverted cpu voltage roundings.

(v1.3.2 -> v1.3.3) changed headphone detection again (should fix some random reboots, hopefully) and disabled thunderbolt scripts for now.

(v1.3.3 -> v1.3.4) changed descriptions and removed some items from audio tab in ExTweaks. decreased default headphone volume slightly.added/removed some options and some defaults are changed. some cleanup in init scripts. reverted some parameters in pegasusq governor to defaults.

(v1.3.4 -> v1.3.5) fixed mic issue with Omega ROM (at least on the one that I use now, and probably with some others). make sure you power-off the device after you flash & then restart. thanks to ::indie::@XDA for giving me enough information about the differences.

(v1.3.5 -> v1.3.6) this time I am pretty sure that omega rom mic problem is fixed.

(v1.3.6 -> v1.3.7)

fixed fmradio problem with dac_direct and added it back to ExTweaks.

added fll_tuning (known as Anti-jitter) back.

added dynamic_gain back which will prevent distortion with high gimme-drums effect.

fixed system partition being mounted r/w. insecure-adbd as default.

fixed adbd being killed when ExTweaks is launched

and some other tiny changes/cleanups…

 

Odin ---> Siyah-s3-v1.3.7beta.tar

Cwm ---> Siyah-s3-v1.3.7beta-CWM.zip

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel-S3-1.3.8

 

Changelog:

 

fixed volume drop on ExTweaks launch

insecure adbd as default

lots of cleanups in scripts

headphone amplification limit changed from +5dB to +6dB.

fll_tuning (known as anti-jitter) enabled as default

this version will not reset your previous extweaks settings

tested on miui

detailed wakelock statistics (thanks to tungstwenty for the patch), you should turn it on in Extweaks to see detailed statistics in betterbatterystats

added enable/disable GPU resume frequency setting. disabling it will save battery but may decrease UI responsiveness.

added touch boost level setting (or disable) to ExTweaks. default is still 800MHz.

fixed video recording problem with CM9

added mDNIe negative toggle enable/disable checkbox to ExTweaks

mDNIe sharpness tweaks (thanks to hardcore)

updated to latest source drop from Samsung (Update3)

changed packet filter settings to block multicast packets (thanks to Entropy512)

updated ramfs init files and exfat modules to LFB kernel

fixed sound enhancement settings not being applied sometimes

Siyah-s3-v1.3.8.tar

Siyah-s3-v1.3.8-CWM.zip

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel-S3-v1.4

 

Changelog:

 

updated wifi driver (bcmdhd 1.15.12 -> 1.15.15)

added graphical equalizer and some equalizer presets to STweaks

update cm10 init files to preview9

enabled kmem interface for cm10 (fixes chargecurrent settings and some other problems related with STweaks)

works on LG6 and LG8 based Samsung ROMs.

Siyah-s3-v1.4.tar

Siyah-s3-v1.4-CWM.zip

Edytowane przez Radek (wyświetl historię edycji)

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel S3-v1.5beta2

 

Changelog

 

dded (again) Entropy512′s multicast filter patch to wifi driver

possible sound crackling fix. (please test and report)

added gpu frequency steps (valid ones: 54 108 160 266 275 300 333 350 440 and also added 533MHz for those who like to overclock) to STweaks interface

some auto-brightness behavior modifications (known as brightness-curve from my S2 kernel). please test this one as well and report if it is good or bad.

enabled autorooting again (supersu 0.94)

increased usb charging current limit in STweaks to 900mA for those who have USB3 ports.

added 700 and 600MHz steps for touchboost setting in STweaks

update beta1 -> beta2: fixed fm speaker problem with dac_direct. disable hardware equalizer when the headphones are not attached to prevent distortion on the main speakers..possible fix for mtp problems on osx.

update beta2 -> beta3 (not released yet) adbd in lpm mode (charging while the device is off).

Siyah-s3-v1.5beta2.tar

Siyah-s3-v1.5beta2-CWM.zip

Edytowane przez Radek (wyświetl historię edycji)

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel S3-v1.5beta4

 

Changelog

 

added (again) Entropy512′s multicast filter patch to wifi driver

possible sound crackling fix. (please test and report)

added gpu frequency steps (valid ones: 54 108 160 266 275 300 333 350 440 and also added 533MHz for those who like to overclock) to STweaks interface

some auto-brightness behavior modifications (known as brightness-curve from my S2 kernel). please test this one as well and report if it is good or bad.

enabled autorooting again (supersu 0.94)

increased usb charging current limit in STweaks to 900mA for those who have USB3 ports.

added 700 and 600MHz steps for touchboost setting in STweaks

update beta1 -> beta2:

fixed fm speaker problem with dac_direct.

disable hardware equalizer when the headphones are not attached to prevent distortion on the main speakers

possible fix for mtp problems on osx.

update beta2 -> beta3:

adbd in lpm mode (charging while the device is off).

when the device is charging in off state, limited the number of cores to 1, frequency to 200-800.

speaker amplification setting in STweaks.

update beta3 -> beta4

enabled swap.

enabled zram. patched mm and android files to include android specific zram optimizations (from note kernel).

updated pegasusq to the latest version which has min_cpu lock.

added 533MHz gpu step back and also added 600, 640, 666, 700 and 800MHz step

enabled ZRAM as default with 150MB swap.

fixed mali currentlevel after resume.

enabled speaker_tuning

some autobrightness related changes (please comment on if this one or the original is better)

Siyah-s3-v1.5beta4.tar

Siyah-s3-v1.5beta4-CWM.zip

Edytowane przez Radek (wyświetl historię edycji)

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel S3-v1.5beta5

 

Changelog

 

added (again) Entropy512′s multicast filter patch to wifi driver

possible sound crackling fix. (please test and report)

added gpu frequency steps (valid ones: 54 108 160 266 275 300 333 350 440 and also added 533MHz for those who like to overclock) to STweaks interface

some auto-brightness behavior modifications (known as brightness-curve from my S2 kernel). please test this one as well and report if it is good or bad.

enabled autorooting again (supersu 0.94)

increased usb charging current limit in STweaks to 900mA for those who have USB3 ports.

added 700 and 600MHz steps for touchboost setting in STweaks

update beta1 -> beta2:

fixed fm speaker problem with dac_direct.

disable hardware equalizer when the headphones are not attached to prevent distortion on the main speakers

possible fix for mtp problems on osx.

update beta2 -> beta3:

adbd in lpm mode (charging while the device is off).

when the device is charging in off state, limited the number of cores to 1, frequency to 200-800.

speaker amplification setting in STweaks.

update beta3 -> beta4

enabled swap.

enabled zram. patched mm and android files to include android specific zram optimizations (from note kernel).

updated pegasusq to the latest version which has min_cpu lock.

added 533MHz gpu step back and also added 600, 640, 666, 700 and 800MHz step

enabled ZRAM as default with 150MB swap.

fixed mali currentlevel after resume.

enabled speaker_tuning

some autobrightness related changes (please comment on if this one or the original is better)

beta4 -> beta5: fixed eq reset problem with samsung stock player. some gpu related tweaks. removed speaker tuning from STweaks but it is still available for those who want to enable it (look in /sys/class/misc/scoobydoo_sound)

Siyah-s3-v1.5beta5-CWM.zip

Siyah-s3-v1.5beta5.tar

Edytowane przez Radek (wyświetl historię edycji)

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

finalna wersja SiyahKernel S3-v1.5

 

zmiany:

 

added (again) Entropy512′s multicast filter patch to wifi driver

possible sound crackling fix. (please test and report)

added gpu frequency steps (valid ones: 54 108 160 266 275 300 333 350 440 and also added 533MHz for those who like to overclock) to STweaks interface

some auto-brightness behavior modifications (known as brightness-curve from my S2 kernel). please test this one as well and report if it is good or bad.

enabled autorooting again (supersu 0.94)

increased usb charging current limit in STweaks to 900mA for those who have USB3 ports.

added 700 and 600MHz steps for touchboost setting in STweaks

update beta1 -> beta2: fixed fm speaker problem with dac_direct. disable hardware equalizer when the headphones are not attached to prevent distortion on the main speakers.

update beta2 -> beta3: adbd in lpm mode (charging while the device is off). when the device is charging in off state, limited the number of cores to 1, frequency to 200-800. speaker amplification setting in STweaks.

update beta3 -> beta4: enabled swap. enabled zram. patched mm and android files to include android specific zram optimizations (from note kernel). updated pegasusq to the latest version which has min_cpu lock. added 533MHz gpu step back and also added 600, 640, 666, 700 and 800MHz step. enabled ZRAM as default with 150MB swap. fixed mali currentlevel after resume. enabled speaker_tuning. some autobrightness related changes (please comment on if this one or the original is better)

beta4 -> beta5: fixed eq reset problem with samsung stock player. some gpu related tweaks. removed speaker tuning from STweaks but it is still available for those who want to enable it (look in /sys/class/misc/scoobydoo_sound)

beta5 -> beta6: fixed speaker amplification and notification sound clamping (was only broken in beta5). added 5th GPU step. removed resume freq completely and added gpu freq boost on touch (0-disabled, 1-jump to step2 on touch 2-jump to step3 on touch). fixed MTP problem in OSX. Testing: Eq presets for speaker (re-enabled equalizer for speakers). led brightness limit removed (cherry-picked from cm10 kernel). reverted high brightness settings (if you want higher brightness increase max gamma to a higher level)

beta6 -> rc1: insecure adbd. disabled eq for speakers. re-enabled speaker tuning . removed speaker amplification and tuning level (too many people complaining about distortion after setting it to max which is not a kernel problem. so, you will have to set it manually). lots of refactorings in sound part. set swappiness to 90 (only effective if you enable zram or swap).

rc1 -> release: Linux 3.0.15. CGROUP_TIMER_SLACK. added a little delay before applying STweaks settings on boot to fix gpu settings not being applied. speaker amplification is added back to stweaks but not as 0-63 but as 0-6, 0 will be the the same as stock. Touch gestures by Tungstwenty (example gestures for S3). Configurable notification led behavior in STweaks (blinking or fading). gpu boost on pressing keys (hard & soft).

 

 

Odin --->

Cwm --->

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel S3-v1.5.2

 

Changelog

 

 

  • added (again) Entropy512′s multicast filter patch to wifi driver
  • possible sound crackling fix. (please test and report)
  • added gpu frequency steps (valid ones: 54 108 160 266 275 300 333 350 440 and also added 533MHz for those who like to overclock) to STweaks interface
  • some auto-brightness behavior modifications (known as brightness-curve from my S2 kernel).
  • enabled autorooting again (with SuperSu 0.94 from Chainfire)
  • increased usb charging current limit in STweaks to 900mA for those who have USB3 ports.
  • added 700 and 600MHz steps for touchboost setting in STweaks
  • enabled swap and zram support
  • updated pegasusq to the latest version which has min_cpu lock.
  • added 533MHz gpu step back and also added 600, 640, 666, 700 and 800MHz steps.
  • led brightness limit removed (cherry-picked from cm10 kernel)
  • insecure adbd.
  • set swappiness to 90 (only effective if you enable zram or swap)
  • reverted back to Linux 3.0.15 base as in Samsung stock kernel.
  • CGROUP_TIMER_SLACK.
  • added a little delay before applying STweaks settings on boot to fix gpu settings not being applied.
  • speaker amplification is added back to stweaks but not as 0-63 but as 0-6, 0 will be the the same as stock.
  • Touch gestures by Tungstwenty ().
  • gpu boost on touchscreen and pressing keys (hard & soft).
  • Update 1.5 -> 1.5.1: fixed lpm mode (charging when device is off). fixed amplification settings being reset on some conditions. some mali related changes. removed lots of unused and unnecessary code. some pegasusq changes. removed arm topology related patches.
  • Update 1.5.1 -> 1.5.2: set ro.debuggable to 1 in default.prop to get superuser working on cm10 (supersu users doesn’t need this update).

 

 

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel S3-v1.5.3

Changelog

 

Update 1.5.2 -> 1.5.3: adb from jellybean sources.removed smooth scaling from STweaks settings (it was already disabled in v1.5 but I forgot to remove the settings from customconfig.xml).

touch gesture size increased to 30 (by Tungstwenty). added NFS module. some tiny TMU modifications. Added lulzactiveq governor (by robertobsc).

Changed memory mapped regions’ allocation sizes (by AndreiLux). fixed orbot problem. disabled kies daemon (thanks to AndreiLux).

 

CWM --->

Odin --->

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja wersja 1.6Beta.

Ta wersja jest tylko dla bet JB od Samsunga

Co działa:


  • What is working:charge boost (for AC: up to 1200mA, for USB: up to 900mA)
  • Auto NTFS mounting to /mnt/ntfs after attaching an NTFS formatted USB stick
  • Audio enhancements, call it scoobydoo sound, eargasm or whatever (fully functional in v1.6b3)
  • Overclocking (changes 1400 step to 1500 or 1600, available in v1.6a5)
  • Some tiny script based tweaks…
  • Undervolting support, but works with nstools only. Used Ezekeel’s customvoltage interface. it is very similar to netarchy’s UV_mV_table and you can use your existing scripts with some little modification. I have also added vdd_levels (don’t know who implemented this) and AndreiLux’s UV_uV_table interfaces but they are in /sys/class/misc/customvoltage. Lowest voltage level is 850mV until the sources are released. (available in v1.6a6)
  • Disabled some logs
  • added lulzactiveq (not tweaked for s3 yet) and hotplug governors (v1.6a7)
  • removed the settings which are not available yet from STweaks (1.6a8)
  • mdnie sharpness tweaks from hardcore (1.6a9)
  • added kernel version to version string to let you see which SiyahKernel version you have (v1.6beta10)
  • based on LI8 stock kernel (v1.6beta10)
  • 4-step gpu clock settings (clock and thresholds), with 533MHz option and with some limitations because of the lack of voltage settings (v1.6beta10)
  • mDNIe sharpness tweaks made optional, in STweaks/Screen tab (v1.6beta11)

Download:http://d-h.st/users/siyah/testing

Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel S3-v1.6 -JellyBean

 

This kernel is for JellyBean only, Samsung or CM10 (starting from RC3).

Available features:

 

  • charge boost (for AC: up to 1200mA, for USB: up to 900mA)
  • Auto NTFS mounting to /mnt/ntfs after attaching an NTFS formatted USB stick
  • Audio enhancements, call it scoobydoo sound, eargasm or whatever (fully functional in v1.6b3)
  • Overclocking (changes 1400 step to 1500 or 1600, available in v1.6a5)
  • Some tiny script based tweaks…
  • Undervolting support, but works with nstools only. Used Ezekeel’s customvoltage interface. it is very similar to netarchy’s UV_mV_table and you can use your existing scripts with some little modification. I have also added vdd_levels (don’t know who implemented this) and AndreiLux’s UV_uV_table interfaces but they are in /sys/class/misc/customvoltage. Lowest voltage level is 850mV until the sources are released. Disabled some logs(available in v1.6a6)
  • added lulzactiveq (not tweaked for s3 yet) and hotplug governors (v1.6a7)
  • removed the settings which are not available yet from STweaks (1.6a8)
  • mdnie sharpness tweaks from hardcore (1.6a9)
  • added kernel version to version string to let you see which SiyahKernel version you have. 4-step gpu clock settings (clock and thresholds), with 533MHz option and with some limitations because of the lack of voltage settings (v1.6beta10)
  • mDNIe sharpness tweaks made optional, in STweaks/Screen tab (v1.6beta11)
  • SIO and V/R I/O Schedulers, CIFS and NFS modules. GPU undervolting (lower limit:850mV, upper limit: 1075mV until the kernel is compiled from the sources) (v1.6beta12)
  • support for setcpu, voltagecontrol and similar apps which are using universal UV interfaces. added 1.6GHz and 1.5GHz CPU freq steps. no longer modified 1.4step for overclocking. (v1.6beta13)
  • fixed some modules not being loaded (v1.6beta14)
  • fixed vdd_levels path to fix STweaks undervolting settings not being applied , adjusted regulator limits (850mV -> 600mV), configurable touchboost freq (v1.6beta15)
  • added gesture support, mdnie toggle with home button, swap & zram (v1.6rc1)
  • 5-step GPU, new frequency steps for GPU, gpu boost on touch and some other GPU related modifications/cleanup. removed zram settings from samsung’s init.rc and added it back to stweaks. (v1.6rc2)
  • mali as module (this version supports both Samsung JB and CM10 ROMs). removed swap & zram. fixed gpu clock setting problem. removed gpu boost temporarily. updated UMP driver. Added arm topology support again with cpupower driver. better loadavg calculation (thanks to AndreiLux for his merges from upstream) (v1.6rc3).
  • removed 900mV GPU voltage limit. fixed GPU voltage settings not being applied on boot. initramfs updates. fixed audio enhancements reset in some conditions. (v1.6)

Siyah-s3-v1.6-CWM.zip

Siyah-s3-v1.6.tar

Edytowane przez Radek (wyświetl historię edycji)

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Zaraz wrzuce sobie 1.6 i przetestuje

Zobaczymy czy jest ok

 

Wysyłane z mojego GT-I9300 za pomocą Tapatalk 2

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel S3-v1.6.3 -JellyBean

 

This kernel is for JellyBean only, Samsung or CM10 (starting from RC3).

 

Available features:

 

 

  • charge boost (for AC: up to 1200mA, for USB: up to 900mA)
  • Auto NTFS mounting to /mnt/ntfs after attaching an NTFS formatted USB stick
  • Audio enhancements, call it scoobydoo sound, eargasm or whatever (fully functional in v1.6b3)
  • Overclocking (changes 1400 step to 1500 or 1600, available in v1.6a5)
  • Some tiny script based tweaks…
  • Undervolting support, but works with nstools only. Used Ezekeel’s customvoltage interface. it is very similar to netarchy’s UV_mV_table and you can use your existing scripts with some little modification. I have also added vdd_levels (don’t know who implemented this) and AndreiLux’s UV_uV_table interfaces but they are in /sys/class/misc/customvoltage. Lowest voltage level is 850mV until the sources are released. Disabled some logs(available in v1.6a6)
  • added lulzactiveq (not tweaked for s3 yet) and hotplug governors (v1.6a7)
  • removed the settings which are not available yet from STweaks (1.6a8)
  • mdnie sharpness tweaks from hardcore (1.6a9)
  • added kernel version to version string to let you see which SiyahKernel version you have. 4-step gpu clock settings (clock and thresholds), with 533MHz option and with some limitations because of the lack of voltage settings (v1.6beta10)
  • mDNIe sharpness tweaks made optional, in STweaks/Screen tab (v1.6beta11)
  • SIO and V/R I/O Schedulers, CIFS and NFS modules. GPU undervolting (lower limit:850mV, upper limit: 1075mV until the kernel is compiled from the sources) (v1.6beta12)
  • support for setcpu, voltagecontrol and similar apps which are using universal UV interfaces. added 1.6GHz and 1.5GHz CPU freq steps. no longer modified 1.4step for overclocking. (v1.6beta13)
  • fixed some modules not being loaded (v1.6beta14)
  • fixed vdd_levels path to fix STweaks undervolting settings not being applied , adjusted regulator limits (850mV -> 600mV), configurable touchboost freq (v1.6beta15)
  • added gesture support, mdnie toggle with home button, swap & zram (v1.6rc1)
  • 5-step GPU, new frequency steps for GPU, gpu boost on touch and some other GPU related modifications/cleanup. removed zram settings from samsung’s init.rc and added it back to stweaks. (v1.6rc2)
  • mali as module (this version supports both Samsung JB and CM10 ROMs). removed swap & zram. fixed gpu clock setting problem. removed gpu boost temporarily. updated UMP driver. Added arm topology support again with cpupower driver. better loadavg calculation (thanks to AndreiLux for his merges from upstream) (v1.6rc3).
  • removed 900mV GPU voltage limit. fixed GPU voltage settings not being applied on boot. initramfs updates. fixed audio enhancements reset in some conditions. (v1.6)
  • v1.6 -> v1.6.1: reverted mtp driver to fix mtp problems on osx. removed some tweaks which were suspected to degrade performance. reniced kswapd0 to have lower priority. new wifi driver from n7105 sources.
  • v1.6.1 -> v1.6.2: cleaned ICS leftovers from ramfs. adjusted maximum GPU voltage constraint (1075mV->1400mV). increased default GPU voltages by 25mV. This version will reset all your STweaks settings to defaults. Enabled swap (still no zram).
  • v1.6.2 -> v1.6.3: change packet filter settings to block multicast (thanks to Entropy512). fixed mali UMP mistakes which might be causing problems on Samsung ROMs. Reverted mali cpu lock levels to stock.

Siyah-s3-v1.6.3-CWM.zip

Siyah-s3-v1.6.3.tar

Edytowane przez Radek (wyświetl historię edycji)

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel S3-v1.6.5 -JellyBean

 

 

v1.6.3 -> v1.6.4: new CPU steps (1700MHz & 1800MHz) (thanks to AndreiLux as I used his kernel and multipliers while making the changes). fixed mali module related problems. fixed lockup problem while charging the device when it is off. reverted most of the changes back to v1.5 state which were removed during the lag-hunting process (discrete wakelocks, gestures, voltages…etc).

v1.6.4 -> v1.6.5 re-adjusted regulator constraints which were lost because of the removed module. fixed touch boost setting. enabled swap.

v1.6.5 -> v1.6.6 changed TMU thresholds a little. fixed freq scaling stuck at some frequencies. removed cfs tweaks from stweaks.

 

 

 

Siyah-s3-v1.6.5-CWM.zip

Siyah-s3-v1.6.5.tar

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel S3-v1.6.7 -JellyBean

 

 

v1.6.6 -> v1.6.6i: one line fix for freq being stuck at 1704MHz. changed process thresholds a little.

v1.6.6i -> v1.6.7: removed last remaining module and linked it into the kernel (mdnie_mods). Made all mdnie variables configurable via misc device (all in /sys/class/misc/mdnie). Hardcore’s sharpness tweaks are converted into a script to use the new interface as an example.

Siyah-s3-v1.6.7-CWM.zip

Siyah-s3-v1.6.7.tar

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel S3-v1.6.8 -JellyBean

 

 

v1.6.7->v1.6.8: fixed mdnie sharpness tweaks causing strange artifacts on boot animation. removed process priority tweaks. removed some unnecessary patches. Enabled GENTLE_FAIR_SLEEPERS in default profile (either enable yourself if you are an existing user or reset stweaks if you want it to be enabled). You will see siyahkernel logo as I made this release while working on dual booting and did not spend any time to remove those, create “.nobootlogo” file in your internal sdcard if you find it too disturbing. Fixed setcpu showing 1704 when overclocked to 1700.

Siyah-s3-v1.6.8-CWM.zip

Siyah-s3-v1.6.8.tar

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel S3 -v1.7rc1 - Dual Boot -JellyBean

 

[video=youtube;SsLpIDV6ZKc]

 

Changelog:

 

  • Dual-booting (supports only JB ROMs: Samsung JB and CM10)
  • fixed a UMP related bug in v1.6.8 that was causing lags for CM10 users
  • removed CPU locking when GPU freq >=440MHz
  • alternate touch recovery for secondrom related operations
  • Some 2ndROM features are missing. Implemented features are: Clone 1stROM to 2ndROM, Clone 2ndROM to 1stROM, Swap ROMs, Delete 2ndROM.
  • v1.7b1 -> v1.7b2: new recovery features: installing zips to secondrom, wipe 2ndROM data/cache & dalvik, fix 2ndROM permissions (EDIT: will be available in the next version), exfat support. Fixed system partition cannot be mounted read/write. The recovery will be flashed together with the kernel.
  • v1.7b2 -> v1.7b3: Recovery is merged with the kernel, no more separate recovery. Flash back your favorite recovery and use STweaks to boot into 2ndROM-utils (which is another CWM-based recovery built into the kernel). Added “no boot logo” option to STweaks. Added “Reboot into 2ndROM Utils”, “Reboot into First ROM” and “Reboot into Second ROM” options. Added “Fix 2ndROM permissions” and “Wipe 2ndROM cache” (wipes only cache partition, not data) to 2ndROM-utils. Fixed some bugs in 2ndROM-utils. Added “Black Crush Fix” by AndreiLux. lcd freq is decreased just a bit to save a little power (has no effect).
  • v1.7b3->v1.7b4: replace the recovery image with the new one which was forgotten in the previous release. fix permissions on 2ndROM should be working now. Made a change in wifi offload filtering to deny muticast packets but allow multicast DNS packets.
  • v1.7b4 -> v1.7b5: added (again) gpu boost on touch. set touch boos default back to 800MHz. updated bcmdhd driver to the one in korean s3 driver. mali refactorings (new_* interfaces removed from /sys/module/mali/parameters. this will fix malistatus problem).
  • v1.7b5 -> v1.7b6: added backup/restore to 2ndROM utils.
  • v1.7b6 -> v1.7rc1: car dock support. reverted TMU modifications. some fixes for backup/restore for 2ndROM and internal/external confusion is resolved. default I/O scheduler is set to deadline. default gpu boost is set to disabled. Added to ramfs (thanks to Oranav@XDA) to fix EasyUMS compatiblity in cm10.

Siyah-s3-v1.7rc1.tar

Siyah-s3-v1.7rc1-CWM.zip

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel S3 -v1.7rc2 - Dual Boot -JellyBean

 

 

Changelog:

 

  • Dual-booting (supports only JB ROMs: Samsung JB and CM10)
  • fixed a UMP related bug in v1.6.8 that was causing lags for CM10 users
  • removed CPU locking when GPU freq >=440MHz
  • alternate touch recovery for secondrom related operations
  • Alternate CWM-recovery based 2ndROM utils which can be used via STweaks. No more custom recovery.
  • Added “no boot logo”, “Reboot into 2ndROM Utils”, “Reboot into First ROM” and “Reboot into Second ROM” options to STweaks.
  • “Black Crush Fix” by AndreiLux.
  • car dock support.
  • Added to ramfs (thanks to Oranav@XDA) to fix EasyUMS compatiblity in cm10.
  • v1.7rc1 -> v1.7rc2: new STweaks (500% faster startup, retouched UI ), applied wifi changes in CM10 repo to fix wifi tethering problem. Based on update6 sources. added discrete wakelock stats and gestures (both by Tungstwenty) back. dns_resolver and md4 modules are linked into the kernel, so loading cifs will be enough to use smb shares. single image for kernel and recovery, if you flash it to boot partition it is a kernel, if you flash it to recovery it is a CWM-based custom recovery (hijack-recovery will be available in STweaks to flash a custom recovery).

Siyah-s3-v1.7rc2.tar

Siyah-s3-v1.7rc2-CWM.zip

Edytowane przez Radek (wyświetl historię edycji)

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Aktualizacja :SiyahKernel S3 -v1.7rc3 - Dual Boot -JellyBean

 

Changelog:

v1.7rc2 -> v1.7rc3: reverted cyanogenmod mdnie scenario commit. reverted wireless driver and added cm10′s wireless driver as a separate module.

 

Odin --->

Cwm --->

  • Upvote 1

Udostępnij tego posta


Odnośnik do posta
Udostępnij na innych stronach

Jeśli chcesz dodać odpowiedź, zaloguj się lub zarejestruj nowe konto

Jedynie zarejestrowani użytkownicy mogą komentować zawartość tej strony.

Zarejestruj nowe konto

Załóż nowe konto. To bardzo proste!

Zarejestruj się

Zaloguj się

Posiadasz już konto? Zaloguj się poniżej.

Zaloguj się

×

Powiadomienie o plikach cookie

By korzystać z forum musisz się zgodzić z zasadami: Warunki użytkowania.